User Guide 4-9Paper TabWindows OperationsCollating CopiesWhen printing multiple copies of a job, the output can be automatically collated. When copiesare collated, they are printed in groups by the print job, not by the page. If you do not select thecollate option, your copies will be printed by page. So, ten page number 1’s will print and thenten page number 2’s will print. Collated jobs will print all pages in sets, pages 1 through 10,until all sets have been printed.The default for Collating is On when there is more than one copybeing printed.To select collating through your Printer Properties:1. Select the Paper tab within your Printer Properties.2. Click Collate.3. Click OK.Setting Image OrientationSelect portrait or landscape orientation or select to rotate the existing orientation by 180degrees.To select orientation through your Printer Properties:1. Select the Paper tab within your Printer Properties.2. Select the desired orientation.You can choose Portrait, Landscape, or to rotate the page 180 degrees.3. Click OK.Output DestinationYou can choose the output tray where your print job will be placed.To select the paper destination through your Printer Properties:1. Select the Paper tab within your Printer Properties.2. Select the desired tray from the Destination pulldown.3. Click OK.Printing in Reverse OrderBy default the printer prints jobs from back to front placing the first page of the document onthe top of the stack. You may opt to print in the reverse order, placing the last page of thedocument on the top of the stack.To select reverse order through your Printer Properties:1. Select the Paper tab within your Printer Properties.2. Select Reverse.
