TallyGenicom Intelliprint 8008N Color Laser Printer User Guide6-8z “JAM-A Tray, Rear”: A media jam has occurred between the feeder and thetransfer belt. To resolve the jam, remove the paper tray and open the backcover of the printer.z “JAM-B Rear”: A media jam has occurred near the transfer belt. To resolvethe jam, open the back cover of the printer.z “JAM-C Rear”: A media jam has occurred between the transfer belt and thefuser unit. To resolve the jam, open the back cover of the printer.z “JAM-D Duplex”: A media jam has occurred in the lower part of DuplexUnit. To resolve the jam, open the back cover and the duplex cover.z “JAM-E Duplex”: A media jam has occurred in the upper part of DuplexUnit. To resolve the jam, open the back cover, the duplex cover and innerpaper guide.6.2.3 Removing Jams from the PrinterRemoval Procedure for JAM-AThe procedure for resolving JAM-A instructs you, after removing the firstjammed sheet, to search for more sheets. There may be cases when a fewsheets of media remain inside the printer. In some circumstances, for examplewhen a duplex unit has been fitted, it is possible to have several sheets in theprinter at different locations at the same time.1. Determine the target paper trayfrom the LCD message. Then,remove the paper tray.