TallyGenicom Intelliprint 8008N Color Laser Printer User Guide4-224.12 System MenuThe system menu provides access to system settings. Use the followingprocedure to enter the system menu:1. Press the MENU button on the control panel.2. Press the NEXT button until the text “System Menu” is shown on thesecond line of the display.3. Press the SELECT button to enter the System menu.4. Press the NEXT button to move through the submenus: FactoryDefaults, Display Language, Power Saver, Wait Timeout, Job Time-out, Jam Recovery, Hex Print and Intellifilter.5. Press the SELECT button to enter a submenu.6. Use the procedures in the following table to access and change the systemsettings:Submenus Default Setting Available Settings Procedure for ChangingSettingFactory DefaultsThis submenu allows you toreset the printer to U.S. or Non-U.S. factory defaults.U.S. U.S.Non-U.S.1. Press NEXT or PREVIOUS totoggle between U.S. and NON-U.S.2. Press SELECT to choose andset the factory defaults.Display LanguageThis submenu allows you tochange the language of thedisplay messages.English EnglishFrench (Francais)German (Deutsch)Italian (Italiano)Spanish (Espanol)PortugueseDutchDanishNorweiganSwedishGreekPolishRussianTurkishBrazilian portuguese1. Press NEXT or PREVIOUS toscroll through the availablelanguages.2. Press SELECT to choose andset the language.Power Saver 15 (Minutes) 1 – 999 1. Press NEXT or PREVIOUS toincrease or decrease the time.2. Press SELECT to save thissetting.
