TallyGenicom Intelliprint 8008N Color Laser Printer User Guide4-304.17 FLASH MenuNote: This menu selection will only appear if an optional hard disk drive or FlashDIMM has been installed. See “Installing DRAM Memory DIMMS” for moredetails.The FLASH Menu provides access to the printer settings that are related to theFLASH DIMM. This menu appears when a User Flash is installed in theprinter. Use the following procedure to enter the FLASH Menu:1. Press the MENU button on the control panel.2. Press the NEXT button until the text “FLASH Menu” is shown on thesecond line of the display.3. Press the SELECT button to enter the FLASH menu.4. Press the NEXT button to move through the submenus: Print, Delete,Format FLASH and FLASH summary.5. Press the SELECT button to enter a submenu.6. Use the procedures in the following table to access and change the systemsettings:WARNING! All files on the FLASH DIMM will be deleted if the FormatFLASH function is selected..Submenus Procedure for Changing SettingPrintThis selection will read the selected filefrom FLASH and print it as if it were beingreceived from one of the input ports.1. Press NEXT or PREVIOUS to scrollthrough the files.2. Press SELECT to choose and print the file.DeleteThis selection will delete the selected diskfile or directory from the FLASH DIMM. Todelete an entire directory, you must firstdelete all the files within that directory.1. Press NEXT or PREVIOUS to scrollthrough the files.2. Press SELECT to choose and delete thefile.Format USR FlashThis selection will reformat the FLASHDIMM.1. Press SELECT to reformat the FLASHDIMM.Flash SummaryThis selection will print a page containinginformation about the installed FLASHDIMM including a list of all the currentexisting files and directories.1. Press SELECT to print the FLASHsummary.
