User guide The Menu54Setting line spacing (LPI) Sets the lines per inch (line density). The higher the parameter thesmaller the line spacing (random LPI can be selected via the ESCsequences).Press LPI (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: 2 LPI, 3 LPI, 4 LPI, 6 LPI*, 8 LPI, 12 LPIDefault Setting: 6 LPIConfirm the setting by pressing the Set key (1). Press the Next key(4) to access the next group of parameters.Selecting start signalfor escape sequence (ESC-Char)Selects the start signal for control sequences. Setting ESC: Onlycharacter Escape (27d, 1Bh) can be used. Setting ESC+$$: Char-acter Escape or alternatively two $ characters ($$) can be used.Press ESCChar (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: ESC/ESC+$$Default Setting: ESCConfirm the setting by pressing the Set key (1).Font LPIOnlineSetup21 3 4Back Next6 LPI *OnlineSetupSet < > Exit21 3 4ESCChar ProtocolOnlineSetup21 3 4Back NextESCChar=ESC *OnlineSetupSet < > Exit21 3 4
