User guide The Menu72Line length (Width) Selects the line length in inches. With the setting of 8 Inch, the prin-ter operates like a printer with a width of only 8 inches.Press Width (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: 8 Inch, 13.2 Inch, 13.6 InchDefault Setting: 13.6 InchConfirm the setting by pressing the Set key (1). Press the Next key(4) to access the next group of parameters.Barcode (Barcode) With this function selected it is posible to print different barcodes andLCP (Large Character Printing).Press Barcode (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: On/OffDefault Setting: OffThe definition and activation is performed by special sequencesthrough the interface. Since this selection is possible for all emulati-ons it must be noted that conflicts in sequence conformity with theselected emulation may occur. (The possible barcodes, LCP cha-racters and the operation of these functions are described in theProgrammer’s Manual).Confirm the setting by pressing the Set key (1).WidthOnlineSetup21 3 4Back NextWidth=13.6Inch *OnlineSetupSet < > Exit21 3 4Barcode BarmodeOnlineSetup21 3 4Back NextBarcode=Off *OnlineSetupSet < > Exit21 3 4
