User guide The Menu79Left-hand area (Leftzon) If the parameter is On, the print head moves out of the perforationzone (area t) on the left as long as the paper is being transported.The Pagewid setting has no influence (see above).Press the Leftzon key (2).Setting options: On/OffDefault setting: OffConfirm your settings with the Set key (1).Right-hand area (Rightzo) If the parameter is On, the print head travels from the right-hand per-foration area (u) towards the center of the paper while the paper ismoving. The Pagewid option must be correctly set in this case, seePaper width (Pagewid) (page 78).Press the Rightzo key (3).Setting options: On/OffDefault setting: OffIf this parameter is On, the print head carriage travels to thecenter of the form while the paper is loaded.Confirm the setting by pressing the Set (1) key. Change to the nextparameter group with the Next key (4).Leftzon RightzoOnlineSetup21 3 4Back NextLeftzon=Off *OnlineSetupSet < > Exit21 3 4Leftzon RightzoOnlineSetup21 3 4Back NextRightzo=Off *OnlineSetupSet < > Exit21 3 4
