User guide The Menu64IP address administration(IP Get M)Selects the way of administrating the IP address.Press IP Get M (3) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: Static, DHCP, BOOTPDefault Setting: StaticConfirm the setting by pressing the Set key (1).The setting Static is the precondition that the values entered inthe parameter IP Addr become valid (see Setting IP address (IPAddr) (page 62). For further informations, refer to the WebPanel Manual on the Online-CD-ROM.Press the Next key (4) to access the next group of parameters.Banner page (Banner) Specifies whether a banner page is to be printed out, when using theLPD/LPR protocol.Press Banner (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: Yes/NoDefault Setting: NoYes: When using the LPD/LPR protocol a banner page will be prin-ted out in front of every print job, containing the file name and theprint queue name. The width of the banner page is 8".Confirm the setting by pressing the Set key (1).Press the Next key (4) to leave the parameter group Interf.. Pressthe Next key (4) again to access the next group of parameters.Subnet IP Get MOnlineSetupBack Next21 3 4IP Get M=Static*OnlineSetupSet < > Exit21 3 4BannerOnlineSetupBack Next21 3 4Banner=No *OnlineSetupSet < > Exit21 3 4
