Tascam 2488neo Owner's Manual

Contents

104 TASCAM 2488neoThe Bank Select controller is used with channel 15 tochoose which group of eight channels or inputs are affect-ed. It is therefore necessary to send a MIDI message of BE00 XX (where XX selects the group of eight channels orinputs) before sending the Control Change messages on theappropriate MIDI channel.Bank 0: Mixer channels 1 though 8Bank 1: Mixer channels 9 through 16Bank 2: Mixer channels 17 through 24Bank 3: Inputs A through HOnce the group has been selected, use MIDI channels 1through 8 to control the mixer channels or inputs or MIDIchannel 16 for the stereo master or send master).Mixer Control Change parametersMIDI channel 1–8 16Mixer/Input channel STEREO/MASTERControl ChangeNumber Parameter Values7 Internal Level 0 - 127 (0= –∞ dB, 100 = 0 dB, 127 = +6 dB)10 Pan 1 = L63, 64 = Center, 127 = R63 —11 Attenuation 0 – 8 = –42, –36, –30, –24, –18, –12, –6, 0, +6 (dB)16 Low Freq 0 – 31 = 32, 40, 50, 60, 70, 80, 90, 100, 125, 150, 175, 200, 225, 250, 300, 350, 400,450, 500, 600, 700, 800, 850, 900, 950, 1.0k, 1.1k, 1.2k, 1.3k, 1.4k, 1.5k, 1.6k (Hz)17 Low Gain 0 – 24 = –12 to +12 (dB)18 Mid Freq0 – 63 = 32, 40, 50, 60, 70, 80, 90, 100, 125, 150, 175, 200, 225, 250, 300, 350, 400,450, 500, 600, 700, 800, 850, 900, 950, 1.0k, 1.1k, 1.2k, 1.3k, 1.4k, 1.5k, 1.6k, 1.7k,1.8k, 1.9k, 2.0k, 2.2k, 2.4k, 2.6k, 2.8k, 3.0k, 3.2k, 3.4k, 3.6k, 3.8k, 4.0k, 4.5k, 5.0k,5.5k, 6.0k, 6.5k, 7.0k, 7.5k, 8.0k, 9.0k, 10k, 11k, 12k, 13k, 14k, 15k, 16k, 17k, 18k (Hz)19 Mid Gain 0 – 24 = –12 to +12 (dB)20 Mid Q 0 - 6 = 0.25, 0.5, 1, 2, 4, 8, 1621 High Freq32 – 63 = 1.7k, 1.8k, 1.9k, 2.0k, 2.2k, 2.4k, 2.6k, 2.8k, 3.0k, 3.2k, 3.4k, 3.6k, 3.8k,4.0k, 4.5k, 5.0k, 5.5k, 6.0k, 6.5k, 7.0k, 7.5k, 8.0k, 9.0k, 10k, 11k, 12k, 13k, 14k, 15k,16k, 17k, 18k (Hz)22 High Gain 0 – 24 = –12 to +12 (dB)23 LOOP Effect Level 0 – 127 (0= –∞ dB, 100 = 0 dB, 127 = +6 dB) (MASTER LEVEL)24 EFFECT1 Level 0 – 127 (0= –∞ dB, 100 = 0 dB, 127 = +6 dB) (MASTER LEVEL)25 EFFECT2 Level 0 – 127 (0= –∞ dB, 100 = 0 dB, 127 = +6 dB) (MASTER LEVEL)80 EQ SW 0, 1 = OFF, ON81 LOOP Effect Pos 0, 1 ,2 = OFF, PRE, POST—82 EFFECT1 Pos 0, 1, 2 = OFF, PRE, POST83 EFFECT2 Pos 0, 1, 2 = OFF, PRE, POST84 Phase 0, 1 = N, RThe following are the MIDI Control Change messagesaccepted by the 2488neo to control different settings.When used with an external sequencer, this provides a cer-tain degree of automation for mixing, etc.MIDI Control/Program change message15 − Appendix