TASCAM 2488neo 637 − RecorderThis deletes all the audio material in the selected trackor tracks.The IN and OUT points do not have any meaning here.There is only one value that you can change:Src. Trk Selects the tracks for erasing the audio data. Youcan select a single track (1 through 24), a pair of tracks(1/2, 3/4, etc.), all the tracks (1-24) or virtual tracks thathave not been assigned to physical tracks (Vtrack).Press YES/ENTER to perform the operation or NO/EXIT toleave this screen.CLEAN OUTCLONE TRACKThis copies a track or pair of tracks to another track orpair of tracks. The IN and OUT points do not have anymeaning here.There are two values that you can change:Src. Trk Select an individual track (1 through 24), or a pairof tracks (1/2, 3/4, 5/6, etc.) or the MASTER stereo track.Dst. Trk This sets the destination track or tracks towhich the source track is cloned. What you can select heredepends on what you have selected for the source track.If you have selected a single track, you can select tracks 1through 24 here. If you have selected a pair of tracks (forinstance, 1/2 or MASTER), you can only select track pairs(1/2, 3/4, etc.) here.Press YES/ENTER to perform the operation or NO/EXIT toleave this screen.If you try to select the same track as a destination thatyou have selected as the source, when you press the YES/ENTER key, a pop-up message will appear.Redo the operation with a different set of tracks.SILENCEThis function is equivalent to recording silence betweenthe IN and OUT points on the chosen track or tracks.OUTOUTININNo material is added or deleted, and the length of the resultis therefore the same as that of the original.There is only one value that you can change:Src. Trk Select an individual track (1 through 8), a pair oftracks (1/2, 3/4, 5/6, etc.), or all the tracks (1-24).Press YES/ENTER to perform the operation or NO/EXIT toleave this screen.
