15 − AppendixTASCAM 2488neo 107Stereo dynamics processorThe dynamics processor inserted at the stereo master buscan be either a compressor or an expander. Use MIDI chan-nel 9 to control this processor.Effect NRPN Parameter ValuesCompressor (CMP)00 00 Threshold 0 – 32 = –32 – 0 dB00 01 Ratio 0 – 14 = 1.0:1, 1.1:1, 1.3:1, 1.5:1, 1.7:1, 2.0:1, 2.5:1, 3.0:1, 3.5:1, 4.0:1,5.0:1, 6.0:1, 8.0:1, 16:1, ∞:1,00 02 Attack 1 – 100 = 2 – 200 (msec)00 03 Release 1 – 100 = 10 – 1000 (msec)00 04 Post Gain 0 – 32 = 0 – 32 (dB)00 05 Switch 0, 1 = Off, OnExpander (EXP)00 00 Threshold 0 – 32 = -32 – 0 dB00 01 Ratio 0 – 14 = 1:1.0, 1:1.1, 1:1.3, 1:1.5, 1:1.7, 1:2.0, 1:2.5, 1:3.0, 1:3.5, 1:4.0,1:5.0, 1:6.0, 1:8.0, 1:16, 1:32,00 02 Attack 1 – 100 = 2 – 200 (msec)00 03 Release 1 – 100 = 10 – 1000 (msec)00 04 (reserved)00 05 Switch 0, 1 = Off, OnUse MIDI channel 10 to control this processor. The singleprocessor can use any one of a number of effect types:reverb, delay, chorus, pitch shifter,flanger, phaser andgated reverb.Single effectEffect NRPN Parameter ValuesReverb (REV)00 00 Room Type 0 – 3 = Hall, Room, Live, Studio00 01 Pre Delay 0 – 250 = 0 – 250 (msec)00 02 Rev Time 1 – 100 = 0.1 – 10.0 (sec)00 08 Diffusion 0 – 100 = 0 – 10000 04 Level 0 – 127 = 0 – 127Delay (DLY)00 00 Type 0 – 2 = Normal, Pan, Multi00 01 Pre Delay 0 – 1000 = 0 – 1000 (msec)00 02 FB Delay 0 – 1000 = 0 – 1000 (msec)00 03 Feedback 0 – 100 = 0 – 10000 04 Level 0 – 127 = 0 – 127Chorus (CHO)00 00 Rate 1 – 100 = 0.1 – 10.0 (Hz)00 01 Depth 0 – 100 = 0 – 10000 02 FB Delay 0 – 100 = 0 – 10000 03 Feedback 0 – 100 = 0 – 10000 04 Level 0 – 127 = 0 – 127
