Tascam 2488neo Owner's Manual

Contents

15 − Appendix106 TASCAM 2488neoEffect NRPN Parameter ValuesCompressor (CMP)00 00 Threshold0 – 100 = –40.0, –39.6, –39.2, –38.8, –38.4, –38.0, –37.6, –37.2, –36.8,–36.4, –36.0, –35.6, –35.2, –34.8, –34.4, –34.0, –33.6, –33.2, –32.8,–32.4, –32.0, –31.6, –31.2, –30.8, –30.4, –30.0, –29.6, –29.2, –28.8,–28.4, –28.0, –27.6, –27.2, –26.8, –26.4, –26.0, –25.6, –25.2, –24.8,–24.4, –24.0, –23.6, –23.2, –22.8, –22.4, –22.0, –21.6, –21.2, –20.8,–20.4, –20.0, –19.6, –19.2, –18.8, –18.4, –18.0, –17.6, –17.2, –16.8, –16.4,–16.0, –15.6, –15.2, –14.8, –14.4, –14.0, –13.6, –13.2, –12.8, –12.4, –12.0,–11.6, –11.2, –10.8, –10.4, –10.0, – 9.6, – 9.2, – 8.8, – 8.4, – 8.0, –7.6,–7.2, – 6.8, – 6.4, – 6.0, – 5.6, – 5.2, – 4.8, – 4.4, – 4.0, – 3.6, – 3.2,– 2.8, – 2.4, – 2.0, – 1.6, – 1.2, – 0.8, – 0.4, 0.0 (dB)00 01 Ratio 0 – 100 = 0 – 10000 02 Attack 0 – 100 = 0 – 10000 08 Release 0 – 100 = 0 – 10000 03 Post Gain 0 – 100 = 0 – 100De-esser (DSR) 00 04 Frequency 0 – 20 = 1.00, 1.07, 1.15, 1.23, 1.32, 1.41, 1.52, 1.62, 1.74, 1.87, 2.00,2.14, 2.30, 2.46, 2.64, 2.83, 3.03, 3.25, 3.48, 3.73, 4.00 (kHz)00 05 Depth 0 – 100 = 0 – 100Exciter (EXC) 00 06 Frequency 0 – 20 = 1.00, 1.07, 1.15, 1.23, 1.32, 1.41, 1.52, 1.62, 1.74, 1.87, 2.00,2.14, 2.30, 2.46, 2.64, 2.83, 3.03, 3.25, 3.48, 3.73, 4.00 (kHz)00 07 Depth 0 – 100 = 0 – 100Noise suppressor00 09 Threshold0 – 100 = –84.0, –83.4, –82.8, –82.2, –81.6, –81.0, –80.4, –79.8, –79.2,–78.6, –78.0, –77.4, –76.8, –76.2, –75.6, –75.0, –74.4, –73.8, –73.2,–72.6, –72.0, –71.4, –70.8, –70.2, –69.6, –69.0, –68.4, –67.8, –67.2,–66.6, –66.0, –65.4, –64.8, –64.2, –63.6, –63.0, –62.4, –61.8, –61.2,–60.6, –60.0, –59.4, –58.8, –58.2, –57.6, –57.0, –56.4, –55.8, –55.2,–54.6, –54.0, –53.4, –52.8, –52.2, –51.6, –51.0, –50.4, –49.8, –49.2,–48.6, –48.0, –47.4, –46.8, –46.2, –45.6, –45.0, –44.4, –43.8, –43.2,–42.6, –42.0, –41.4, –40.8, –40.2, –39.6, –39.0, –38.4, –37.8, –37.2,–36.6, –36.0, –35.4, –34.8, –34.2, –33.6, –33.0, –32.4, –31.8, –31.2,–30.6, –30.0, –29.4, –28.8, –28.2, –27.6, –27.0, –26.4, –25.8, –25.2,–24.6, –24.0 (dB)00 10 Suppress 0 – 100 = 0 – 10000 11 Attack 0 – 100 = 0 – 10000 12 Release 0 – 100 = 0 – 100Mic effectsMic effects are controlled by channels 1 through 8 (see“Effect parameter change MIDI message” on page 105 forchannel/input assignments enabled through Bank Select).One of three different types of effect can be selected as amic effect: compressor, de-esser, exciter or noise suppressor.