Tascam 2488neo Owner's Manual

Contents

60 TASCAM 2488neo7 − RecorderCOPY ® PASTEThis function takes the section of a track or tracks markedby the IN and OUT points, copies it, and places it at the TOpoint on the chosen track or tracks. The original source isleft unchanged.OUTIN TOOUTIN TOThe copy operation overwrites anything which is alreadyrecorded at the destination. The destination is the samelength as it was before the operation.You can copy the section more than once in one operation.You can change the following values:Src.Trk This sets the source track or tracks from which thesection is copied. Choose 1 through 24 to select an individ-ual track. Choose 1/2, 3/4, 5/6 etc. to select a pair of tracks.Choose 1-24 to select all tracks.Dst. Trk This sets the destination track or tracks to whichthe selected section is pasted. What you can select heredepends on what you have selected for the source track.If you have selected a single track, you can select tracks 1through 24 here. If you have selected a pair of tracks (forinstance, 1/2), you can only select track pairs here. If youhave selected all tracks (1-24), then 1-24 is the only optionavailable to you here.Times This is the number of times that the selected sec-tion is pasted into the destination track or tracks. You canset this value from 1 to 99.Press YES/ENTER to perform the operation or NO/EXIT toleave this screen.COPY FROM ® TOThis function copies the audio material from between theIN and OUT points on the copy source track and pastes itto the copy destination track. In this operation, the FROMpoint is set within the section to be copied. When this sec-tion is pasted, this FROM point is relocated to the destina-tion TO point. This function is useful when you need toalign a specific moment in a section, rather than the begin-ning or end of the section, to a specific time.OUTFROMIN TOOUTIN TOThe copy source does not change after this operation.This operation overwrites anything that is recorded at thedestination. The length of the copy destination track doesnot change.This operation has the three following parameters:Src.Trk This selects the source track from which thesection is copied. Choose 1 through 24 to select an indi-vidual track. Choose 1/2, 3/4, etc. to select a pair of tracks.Choose 1-24 to select all tracks.Dst.Trk This sets the destination track to which the selec-tion is copied. Selection options here depend on what youhave selected for the Src.Trk. If you have selected a singletrack, you can select tracks 1 through 24 here. If you haveselected a pair of tracks (for instance, 1/2), you can onlyselect track pairs here (1/2, 3/4, etc.). If you have selectedall tracks (1-24), then 1-24 is the only option available here.Times This is the number of times that the selected sec-tion is pasted into the destination track or tracks.You can set this value from 1 to 99.NOTEThe COPY∑PASTE operation pastes the material afterthe TO point continuously without gaps, while COPYFROM∑TO maintains the amount of time betweenthe FROM point and TO point when audio is pasted.Moreover, only this function appears in the Undo listas COPY∑PASTE.After setting the parameters, press the YES/ENTER key toperform the operation or the NO/EXIT key to leave this screen.