Tascam 2488neo Owner's Manual

Contents

TASCAM 2488neo 617 − RecorderCOPY ® INSERTThis function takes the section of a track or tracks markedby the IN and OUT points, copies it, and places it on thechosen track or tracks, inserting it as new material, startingat the TO point.OUTIN TOOUTIN TOThe original source is left unchanged.The insert operation adds the copy source audio materialafter the TO point. Nothing is overwritten on the destina-tion, as any existing material following the TO point ismoved to the end of the newly-inserted section. The desti-nation is longer than it was before the operation.You can copy the section more than once in one operation.You can change the following values:Src. Trk This sets the source track or tracks from whichthe section is copied. Choose 1 through 24 to select anindividual track. Choose 1/2, 3/4, 5/6 etc. to select a pair oftracks. Choose 1-24 to select all tracks.Dst. Trk This sets the destination track or tracks intowhich the selected section is inserted. What you can selecthere depends on what you have selected for the sourcetrack. If you have selected a single track, you can selecttracks 1 through 24 here. If you have selected a pair oftracks (for instance, 1/2), you can only select track pairshere. If you have selected all tracks (1-24), then 1-24 is theonly option available to you here.Times This is the number of times that the selected sec-tion is inserted (end-to-end) in the destination track ortracks. You can set this value from 1 to 99.Press YES/ENTER to perform the operation or NO/EXIT toleave this screen.This function takes the section of a track or tracks markedby the IN and OUT points, and moves it to the chosen trackor tracks, starting at the TO point.OUTIN TOOUTIN TOAfter the operation, the selected section of the sourcebetween the IN and OUT points is replaced by silence.This operation overwrites anything which is alreadyrecorded at the destination. The destination is therefore thesame length as it was before the operation.You can change the following values:Src. Trk This sets the source track or tracks from whichthe section is taken. Choose 1 through 24 to select an indi-vidual track. Choose 1/2, 3/4, 5/6, etc. to select a pair oftracks. Choose 1-24 to select all tracks.Dst. Trk This sets the destination track or tracks to whichthe selected section is moved. What you can select heredepends on what you have selected for the source track.If you have selected a single track, you can select tracks 1through 24 here. If you have selected a pair of tracks (forinstance, 1/2), you can only select track pairs here. If youhave selected all tracks (1-24), then 1-24 is the only optionavailable to you here.Press YES/ENTER to perform the operation or NO/EXIT toleave this screen.MOVE ® PASTE