28 TASCAM DR-403 – PreparationCAUTIONWhen the unit is started up for the first time (or whenthe built-in clock is reset after being left unused withoutbatteries), the DATE/TIME screen appears before the start-upscreen to adjust the date and time. (See “Setting the date andtime” on page 29.)Press the . or / button to move the cursor (highlightedarea), and use the + or – button to change values.Press the ENTER/MARK button to fix the settings.The start-up screen is displayed, and then the Home Screenappears after the unit has started up.Date/time adjustment may be skipped by pressing theENTER/MARK button, and made later. (See “Setting the dateand time” on page 29.)Shutting downPress and hold the (HOME) [8] button until LINEAR PCMRECORDER appears on the display.The power turns off after the unit completes its shutdownprocess.CAUTIONAlways use the (HOME) [8] button to shutdown theunit.Do not remove the batteries or disconnect the power cable(AC adaptor TASCAM PS-P520E or USB cable) accidently whilethe unit is operating. If you do so, the unit cannot shut downproperly and all recordings, settings and other data will belost. Lost data cannot be restored.Resume functionThe unit has resume function. When started up, the unit islocated to the position (time) where it left off when shut downpreviously.If the PLAY [7] button is pressed after start-up, the file theunit was playing when shut down previously starts to beplayed from the position (time) where the unit left off whenshut down.NOTEThe required data are stored in the SD card. The resumefunction does not work if the card is exchanged or formatted.
