TASCAM DR-40 534 – Recording3 To stop recording, press the (HOME) [8] button.File names when recording in overdubbingWhen overdubbing, file names are generated differentlyaccording to the DUB mode setting.8 SEPARATE modePlayback fileFile-A: TASCAM_0004S12.WAVThe newly recorded file (recorded without the playbacksignal)File-B: TASCAM_0004S34.WAVIf you record again using the same playback file (File-A),the name of File-B above is changed to the file name below(File-C), and the new recording file is given the File-B filename.File-C: TASCAM_0004V34t1.WAVIf you record one more time using the same playback file(File-A) (and File-B and File-C above are saved), the file namefor File-B changes as shown below, with the number at 6increased by one, and the new recording file given the File-Bfile name.File-D: TASCAM_0004V34t2.WAV8 MIX modePlayback fileFile-A: TASCAM_0004S12.WAVThe newly recorded file (recorded with the playback signal(File-A))File-E: TASCAM_0005S12.WAVIf you record again using the same playback file (File-A), thefile name of the new recording will be as follows.File-F: TASCAM_0006S12.WAV
