TASCAM DR-40 776 – PlaybackChanging the playback speed (VSA)The unit features the VSA (Variable Speed Audition) functionthat changes the playback speed without changing its pitch.NOTEVSA function cannot be used when a file that was recordedat 96 kHz sampling frequency or a file that was recorded in amode other than MONO/STEREO or OVERDUB/MIX is selected.However, will be shown in the Home Screen and thesetting of playback speed can be changed. To apply theadjustment of playback speed, select a file recorded with asampling frequency of 44.1 kHz or 48 kHz by using the . or/ button.Press the + or – button after opening the Playback Controlscreen to increase or decrease the playback speed.The VSA function can change the playback speed in the rangefrom 0.5 (50%) to 1.5 (150%) times (in 0.1 increments) thenormal speed.Press the PB CONT button to return to the Home Screenwhile maintaining the set playback speed effective. Theor icon appears if the playback speed is set to a valuelarger or smaller than 1.0, respectively.Using the playback equalizer (PLAY EQ)You can choose from different sound types to enhance thelistenability (PLAY EQ: playback equalizer).Set the playback equalizer in the PLAY SETTING screen.1 Press the MENU button to open the MENU screen.2 Use the + or − button to select PLAY SETTING, and pressthe ENTER/MARK or / button.PLAY SETTING screen appears.3 Use the + or − button to select PLAYEQ, and press theENTER/MARK or / button.4 Use the + or − button to set the equalizer. TREBLE,MIDDLE, and BASS indicate that adjustment in the high,middle, or low frequency range is enabled, and + and –indicate that the sound level in that range is increasedor decreased, respectively.Options: OFF (factory setting), TREBLE +, TREBLE -,MIDDLE +, MIDDLE -, BASS +, BASS -5 When finished, press the (HOME) [8] button toreturn to the Home Screen.
