18 TASCAM DR-60DMKII2 – Names and functions of partsq File nameThis shows the file name that is automatically assigned to arecording file.This shows the project name when there are multiple filesrecorded in 4-channel recording mode or dual recording mode.w Remaining recording timeThe remaining recording time on the SD card is shown in hours:minutes: seconds according to the recording mode, samplingfrequency and recording format settings.e Low cut filter statusThis shows whether the low cut filter is ON/OFF. (See “Using thelow-cut filter” on page 39.)This icon is shown as light letters on a dark background if thelow-cut filter is set to 40Hz, 80Hz or 120Hz for channel 1, channel2 or channels 3/4.: Low cut filter off: Low cut filter onr Limiter function statusAn icon appears if the limiter function setting for channel 1, 2 or3/4 is set to MONO or LINK. (See “Using the limiter” on page 38.): Limiter off: Limiter ont SLATE button settingThis shows the SLATE button setting (enable/disabled).(See “Adding slate tones” on page 52.): SLATE button disabled: SLATE button enabledy Peak value in decibels (dB)Peak input level values are shown digitally.Menu item listPress the MENU button to open the MENU screen. The items in thismenu are as follows.Menu item Function PagesREC MODE Set the recordingsource.page 39, page 40,page 42, page 44INPUT SETTING Make input settings. page 36, page 38,page 39REC SETTING Make recordingsettingspage 30, page 32,page 48, page 50,page 51, page 52AUTO REC Make auto recordingsettings. page 46, page 49PLAY SETTINGMake play area,repeat playback andjump-back settings.page 58, page 61BROWSE SD card file and folderoperationspage 54, page 59page 60OTHERS Show submenu items.page 26, page 36,page 74, page 78,page 79
