TASCAM DR-60DMKII 394 – RecordingUsing the low-cut filterThe low cut filter can reduce noise such as offensive wind noise fromair-conditioners and projectors.1. Press the MENU button to open the MENU screen.2. Turn the DATA dial to select INPUT SETTING, and press theDATA dial or / button to open the INPUT SETTINGscreen.3. Turn the DATA dial to select LOW CUTfor a channel, and pressthe DATA dial or / button.Ch1 INPUT SETTING screen4. Turn the DATA dial to select the cut off frequency of the low cutfilter for mic input.Options: OFF (default value), 40Hz, 80Hz, 120Hz5. When finished making the setting, press the stop (8) [HOME]button to return to the Home Screen.CAUTION• The low-cut filter cannot be used with line input.• Use headphones to monitor when you are recording with a micro-phone. If you use speakers to monitor, the sound output from thespeakers may also be recorded, causing a poor recording andeven feedback.NOTEThe low-cut function can be set and changed even duringrecording standby and when recording.Set where to save the fileSet the folder where recorded files are saved.The created sound file will be saved in the currently selected folder.For details, see SELECT quick menu under “Folder operations” onpage 56.If no setting is made, new recording files are placed in the “MUSIC”folder.Overview of recording modesThis recorder has five recording modes.Use the REC MODEitem on the REC MODEscreen to set therecording mode.The settings available are different for each recording mode.MONO modeThis is a mode for mono recording.STEREO mode (default value)This is a mode for stereo recording of two independent left andright channels.DUAL MONO modeThis mode uses one input source to create files at two differentinput levels (set on INPUT SETTINGscreen). Two mono files willbe recorded.DUAL ST mode
