Tascam DR-60DmkII Reference Manual

Contents

8 TASCAM DR-60DMKII2 – Names and functions of parts7 QUICK buttonPress when the Home Screen, BROWSE screen or MIXER screen isopen to show the quick menu pop-up.The function to be shown depends on the state of the unit whenthe button is pressed.Recorder status Functions shownStoppedDelete/divide current playback file, levelalign, playback EQ and mic input gainsetting functionsPlaying back Level align and playback EQ functionsRecordingstandby Mic input gain setting functionRecordingMIXER screenopen Mic input gain setting functionBROWSE screenopen File/folder operations8 DUAL indicatorThis lights orange when recording in dual recording mode.9 4CH indicatorThis lights orange when recording in 4-channel recording mode.0 REC indicatorThis blinks when in recording standby and lights red whenrecording.q 1/L knob and PEAK indicatorUse this knob to adjust the input level from the 1/L connector onthe left side of the unit.The 1/L PEAK indicator lights when the 1/L input level is aboutto cause distortion. This also lights if distortion occurs in theanalog circuitry during mic input, but this does not light ifdistortion occurs in the analog circuitry during line level input.(See “Adjusting the input level/Muting” on page 36.)w Input switch (1/L)Set the input type for the 1/L connector and whether phantompower is on or off.e 2/R knob and PEAK indicatorUse this knob to adjust the input level from the 2/R connectoron the left side of the unit.The 2/R PEAK indicator lights when the 2/R input level is aboutto cause distortion. This also lights if distortion occurs in theanalog circuitry during mic input, but this does not light ifdistortion occurs in the analog circuitry during line level input.(See “Adjusting the input level/Muting” on page 36.)r Input switch (2/R)Set the input type for the 2/R connector and whether phantompower is on or off.t 3-4 knob and PEAK indicatorUse to adjust the input level from the 3/4 connector on the leftside of the unit.The 3-4 PEAK indicator lights when the 3-4 input level is aboutto cause distortion.