TASCAM DR-60DMKII 233 – PreparationUsing an AC adaptor (sold separately)Connect the TASCAM PS-P515U AC adaptor (sold separately) and theUSB cable to the USB port of the unit as shown in the illustration.Mini-B USB plugAC outletTASCAMPS-P151U(sold separately)NOTEWhen both batteries are installed and the AC adaptor isconnected, power will be supplied from the AC adaptor.CAUTION• Never use any adaptor other than the designated TASCAMPS-P515U AC adaptor (sold separately). Use of a different adaptorcould cause malfunction, fire or electric shock.• Noise may occur when recording with a microphone if the unitis too close to the AC adaptor. In such a case, keep sufficientdistance between the AC adaptor and the unit.Using an external battery pack (sold separately)Connect a TASCAM BP-6AA external battery pack (designed for usewith this unit and sold separately) to the recorder with the includedUSB cable as shown in the illustration. For details, see the BP-6AAOwner’s Manual.Mini-B USB plugTASCAM BP-6AA(sold separately)CAUTIONThe DR-60DMKII cannot detect the remaining battery charge of aBP-6AA. If you use a BP-6AA to operate the DR-60DMKII withoutbatteries in the recorder itself, the unit might stop operatingsuddenly if the battery pack runs out of charge. In order to avoidproblems, put batteries with sufficient charge into the DR-60DMKIIbefore connecting and using a BP-6AA.
