34 TASCAM DR-60DMKII4 – RecordingRecording an external device (LINE IN)Use stereo plug cables to connect to the output of an external audiodevice.Other audio equipmentor external ound sourceCAUTION• Reduce the output level of the external audio device if the inputsound is distorted even when reducing the input gain level on theunit.• When an external audio device with a fixed output line level isconnected, it would be impossible to control the gain level appro-priately because of excessively large input signals. In such cases,use the headphone jack or other level-controllable output forconnection to the unit.Setting the input typesSet the 1/L and 2/R input switches on the front of the unit accordingto the types of equipment connected to them.LINE:Use this setting when connecting line output jacks of externaldevices to the analog inputs of this recorder.MIC:Use this setting when connecting mics to the recorder.MIC+PHANTOM:Use this setting when connecting condenser mics that requirephantom power (+24V or +48V) to the recorder.When you set it to MIC+PHANTOM, a pop-up message appearsconfirming that you want to turn phantom power on. (See “Usingphantom power” on page 35. )Use the SYSTEM screen to set the voltage to +24V or +48V. (See“Setting the phantom power voltage” on page 76. )
