46 TASCAM DR-60DMKII4 – RecordingFile names when recording in 4-channelIn 4-channel recording, a set of two files is created—one for theexternal mics connected to channels 1 and 2 and one for theexternal device or stereo mic connected to channels 3/4.TASCAM_0002S12.WAVTASCAM_0002S34.WAV1: Set with the WORD item on the FILE NAMEscreen2: Recording file base number3: S is the source file4: Assigned channels (12 is channels 1/2 and 34 is channels 3/4)Recording automatically (AUTO REC)This function allows the unit to respond to input sound levels andstart and pause recording, as well as set marks and create new files,for example.1. Press the MENU button to open the MENU screen.2. Turn the DATA dial to select AUTO REC, and press the DATA dialor / button to open the AUTO RECscreen.3. Turn the DATA dial to select MODE and press the DATA dial or/ button.4. Turn the DATA dial to set the automatic recording mode.OFF (default value): OffMARK: Sets marks automatically during recordingPAUSE: Automatically pauses during recordingTRK INC: Automatically creates new files during recording5. Press the DATA dial or . button to select the other item.6. Turn the DATA dial to select START LEVEL, and press the DATAdial or / button.7. Turn the DATA dial to set the start level, which is the level thatthe unit recognizes as an input signal.Options: –6dB, –12dB (default value), –24dB, –48dB8. Press the DATA dial or . button to confirm the setting andreturn to item selection.9. Turn the DATA dial to select END LEVEL, and press the DATAdial or / button.
