130 TASCAM HS-200013 – Other functionsFlash start functionUse the flash start function to instantly start playback oftakes that have been designated in advance.A maximum of 100 takes can be started instantly using akeyboard or an external device connected to one of theunit’s remote connectors (REMOTE and PARALLEL).Setting the flash key function1. Press the MENU key on the front panel to open theMENU screen.2. Touch the REMOTE SETUP button to open theREMOTE SETUP screen.On the GENERAL page, set what happens when aflash start key is pressed, and set the fader functionswhen using a TASCAM RC-HS32PD/RC-HS20PD remotecontroller (sold separately).For details, see “GENERAL page (Remote settings)” onpage 106.Selecting the flash page1. In take mode, select the session that you want to playback. (See “Loading sessions” on page 43.)In playlist mode, select a playlist. (See “Loadingplaylists” on page 83.)2. After touching the flash page operation/display knobon the Home Screen, use the DATA dial to select thepage that contains the files or entries that you want toplay.The first 96 (RC-HS32PD) or 100 (RC-HS20PD)numbered takes or entries in the selected session orplaylist can be played back using flash start.RC-HS32PDPage number Take/entry number1 1-322 33-643 65-96RC-HS20PDPage number Take/entry number1 1-202 21-403 41-604 61-805 81-1003. Press a flash start key to immediately start playback ofthe take or entry that corresponds to that key.NOTEWhen using a TASCAM RC–HS32PD remote controller• (sold separately), file names (or the first parts of longfile names) appear on the keys, making it easy to checkthe files.When using a TASCAM RC-SS20 remote controller (sold• separately), you can flash start the first 20 numberedtakes or entries.When using a computer keyboard, you can flash start• the first 12 numbered takes or entries.Flash start playbackWhen the Flash Start Key Method is set to Flash Start,touching a flash start key causes the corresponding takeor file to start playback instantly.
