TASCAM HS-2000 597 – Timeline modeSetting the editing start (IN) point1. Press the HOME key on the front panel to open theHome Screen.2. Touch the EDIT MODE button to enter the editmode.3. Use the m/, keys (or other controls) to locate thetimeline cursor to the position (time) where you wantediting to start.4. Touch the SET/SELECT button to open a pull-upmenu.5. Touch the SET IN button in the pull-up menu to setthe editing start (IN) point.The IN mark ( ) will appear in the mark display area atthe current position.Setting the editing end (OUT) point6. Use the m/, keys (or other controls) to locate thetimeline cursor to the position (time) where you wantediting to end.7. Touch the SET/SELECT button to open a pull-upmenu.8. Touch the SET OUT button in the pull-up menu toset the editing end (OUT) point.The OUT mark ( ) will appear in the mark display areaat the current position.The interval shown in light blue between the IN () and OUT ( ) marks will be affected by editingoperations.Clearing the start and end (OUT) points1. Touch the SET/SELECT button to open a pull-upmenu.2. Touch the CLEAR button in the pull-up menu. Whena confirmation pop-up appears, touch the OK buttonor press the DATA dial.The current IN and OUT points are removed, and theIN ( ) and OUT ( ) marks disappear
