Tascam HS-8 Owner's Manual

Also see for HS-8: Software manual Software manual Release notes Release notes

Contents

TASCAM HS-8 21CAUTIONNever turn the power OFF during recording, playback, or anythingelse that accesses the CF card. Doing so could, for example, causerecording errors, loss of recorded data, and sudden loud noises tobe output through monitoring equipment, which could result indamaged equipment and hearing loss.Setting the time of the built-in clock1 Press the MENU key on the front panel to open theMENU screen.2 Touch the SYSTEM SETUP button to open the SYSTEMSETUP screen.3 Touch the CLOCK ADJUST tab to open the pagewhere you can set the built-in clock.4 Touch the item that you want to change, and usethe DATA dial on the front panel to change thevalue.5 Touch the SET button, or push the DATA dial toconfirm the setting.NOTEAfter purchasing this unit, set the clock before making your firstrecording. If you do not set the clock, the time stamps on recordingfiles will not be correctPanel lock functionPress the MENU key while pressing and holding the HOMEkey on the front panel to open the LOCK SETUP screenwhere you can disable or enable operation from the frontpanel.The front panel is divided into two sections, which can belocked and unlocked separately.If you press the button for a section, it changes fromUNLOCK to LOCK (with a yellow background) and thelocked area appears dimmed.If the display is touched when the LCD section is locked,the following pop-up window message appears.3 − Preparation