TASCAM HS-8 57FRAME EDIT ONFRAME EDIT OFF3 Touch a number button to edit a mark. Use theDATA dial to change the time for the selectednumber.Press the ENTER button to confirm the setting andreturn to the MARK LIST screen.Touch the CLEAR button to reset the input value.TIPYou can use a PS/2 keyboard to set these values. Press the Enter keyto confirm and press the ESC key to reset the input value.Renumbering marks1 Touch the RENUMBER button on the MARK LIST screento open the following confirmation message.2 Press the OK button or the DATA dial to renumberthe marks.Manual locate functionYou can directly input a time and locate to it. Touch theManual Locate button on the Home Screen to open theMANUAL LOCATE screen. Touch the FRAME EDIT button toset whether or not the frame value can be edited.FRAME EDIT ONFRAME EDIT OFFThere are three locate modes.ABS: Input an actual time and locate to it.+: Input an amount of time to go forward from the currenttime and locate to the new time.–: Input an amount of time to go back from the currenttime and locate to the new time.Input the time using the number buttons. You can alsoselect a number field and use the DATA dial to adjust thetime.Press the LOCATE button to locate to the new time andreturn to the Home Screen.Touch the CLEAR button to clear all input values.TIPYou can use a PS/2 keyboard to set these values. Press the enter keyon the PS/2 keyboard to confirm or press the ESC key button to clearall input values.7 – Mark and Locate Functions