TASCAM HS-8 395 Touch the REBUILD button in the pop-up menuitem.6 Touch the OK button or press the DATA dial when aconfirmation pop-up message appears.During rebuilding, a progress status pop-up appears.When rebuilding completes, the pop-up disappears.NOTEYou can also rebuild a folder from that folder’s take selection screen.Copying foldersYou can copy folders between CF SLOT 1 and CF SLOT 2(two CF cards are necessary).If you copy a folder, the same directory structure is createdat the copy destination.NOTETo play copied folders on this unit, you must rebuild the desti-•nation project or the folder.If you copy a folder with a different sampling frequency into a•project, the folder cannot be rebuilt.1 Press the PROJECT key on the front panel to openthe PROJECT screen.2 Press the “®” button for the project that containsthe folder that you want to copy to open the folderlist.3 Select the folder that you want to copy. Touch theMULTI SELECT button to enable the selection ofmultiple folders.4 Touch the MENU button on the PROJECT screen toopen a pop-up menu.5 Touch the COPY button in the pop-up menu.6 Touch the OK button or press the DATA dial when aconfirmation pop-up message appears.During copying, a progress status pop-up appears.When copying completes, the pop-up disappears.NOTEIf a folder with the same name already exists on the destinationCF card, a message confirming that you want to overwrite theexisting scene appears. Touch the OK button or press the DATA dialto overwrite the existing file and copy the selected scene to thedestination.5 – Projects