TASCAM HS-8 49Mixer settings (MIXER SETUP)Make mixer settings on this screen.The MIXER SETUP screen has 4 pages: INPUT, DIGITALSOURCE, SETUP and OUTPUT. Touch the tabs at the bottomof the screen to open the corresponding page.INPUT pageMake input settings on this page.CHANNEL buttonsPress a channel button to open the corresponding CHxSETUP screen (“x” is the channel).INPUT SOURCESet the input source for each channelAna 1-8: 25-pin D-sub analog input (default setting)•Ana A-B: XLR analog input•AES 1-8: 25-pin D-sub AES/EBU input•AES A-B: XLR AES/EBU input•ADAT 1-8: ADAT input•DIGITAL SOURCE pageSet the digital input sources.CHANNEL buttonsPress a channel button to open the corresponding CHxSETUP screen (“x” is the channel).DIGITAL SOURCESet the digital input source for each pair of channels.AES x-x (default setting): 25-pin D-sub AES/EBU input•AES A-B: XLR AES/EBU input•ADAT x-x: ADAT input•Fs CONVERT buttonsTurn the sampling rate converter ON or OFF for each pairof inputs (default setting: all OFF).SETUP pageAccess the channel name editing screen and turn channellinks ON and OFF on this page.CHANNEL buttonsPress a channel button to open the corresponding CHxSETUP screen (“x” is the channel).CH NAMETouch these buttons to edit the name of thecorresponding channel.CH LinkTouch these buttons to turn channel links ON and OFF.(Default settings: all OFF)The following parameters are shared by link channels.2Mix LVL knob•Solo•Record arming•Input source•PAN pot (becomes balance)•Input monitor•OUTPUT pageMake settings related to output on this page.XLR Output SourceSet the source to be output from the ANALOG OUTPUT L/R and DIGITAL OUTPUT L/R connectors.L/R button (default value): Stereo mix6 – Internal Settings and Operations