Tascam HS-8 Owner's Manual

Also see for HS-8: Software manual Software manual Release notes Release notes

Contents

TASCAM HS-8 27Connecting headphonesConnect headphones to the PHONES connector onthe front panel. Keep the headphones knob turnedto MIN (all the way to the left) when connectingheadphones.HeadphonesCAUTIONBefore connecting headphones, turn the PHONES knob to theminimum volume. Failure to do so could cause sudden loud noisesto occur, which might damage your hearing or equipment.Setting the inputs1 Press the MENU key on the front panel to open theMENU screen.2 Touch the MIXER SETUP button to open the MIXERSETUP screen.On the INPUT page, make settings for eachchannel’s input source. For details, see “INPUTpage” on page 49.3 If necessary, open the DIGITAL SOURCE, SETUP andOUTPUT pages to make additional settings.For details about the DIGITAL SOURCE page, see“DIGITAL SOURCE page” on page 49.On the SETUP page, you can edit channel names andturn channel links ON and OFF. To edit channel names,touch the buttons next to the CH NAME item. For details,see “CHx NAME (button)” on page 50.Make output settings on the “OUTPUT” page. Fordetails, see “OUTPUT page” on page 49.Input settings can also be changed on the CHx SETUPscreens (“x” is the channel). These screens can beopened in two ways.Touch a• CHANNEL SETUP button on the MENU screen.Touch a• CHANNEL button at the top of the MIXERSETUP screen.4 − Recording and Playback