Tascam HS-8 Owner's Manual

Also see for HS-8: Software manual Software manual Release notes Release notes

Contents

TASCAM HS-8 414 Select the take that you want to erase. Touch theMULTI SELECT button to enable the selection ofmultiple takes.5 Touch the MENU button to open a pop-up menu.6 Touch the DELETE button in the pop-up menu.7 Touch the OK button or press the DATA dial when aconfirmation pop-up message appears.During erasure, a progress status pop-up appears.When erasure completes, the pop-up disappears.Changing the start time of a take1 Press the PROJECT key to open the PROJECTscreen.2 Touch the “®” button for the project that containsthe take for which you want to edit the start timeto open the folder selection screen.3 Touch the “®” button for the folder that containsthe take that you want to edit to open the takeselection screen.4 Select the take that you want to edit.5 Touch the “MENU” button on the “PROJECT” screen toshow the pull-up menu.6 Touch the “EDIT TC” button in the pull-up menu toopen the “EDIT TAKE T/C” screen.7 On the “EDIT TAKE T/C” screen, and use the “FRAMEEDIT” button to set whether or not to input theframe value.Frame edit onFrame edit off8 Use the number buttons to input the take starttime.If you begin input without selecting the digit, input•will start from the smallest one.To input a specific digit, touch it and make its•background yellow, then use the number buttons orthe DATA dial to enter two digits at a time.Touch the “• CLEAR” button to erase all entered values.9 Touch the “ENTER” button to confirm the setting.TIPThis can also be edited using a PS/2 keyboard.•Press the PS/2 keyboard ESC key to erase all the values.•10 When the confirmation pop-up window appears,touch the “OK” button or press the DATA dial.Using “@” with take namesSelect a take and touch the “CIRCLE @ TAKE” button toadd “@” to the take name or remove it if it has been addedpreviously.5 – Projects