3.5 Cable Modem - Operation Config Ubee Interactive16 DDW3612 Subscriber User Guide • July, 20103.5 Cable Modem - Operation ConfigThis section explains how to use the Operation Config screen of the web interface.The Operation Config screen displays general information on the device’s activeoperational capabilities.1. Access the web interface. Refer to page 7, if needed.2. Click the Operation Config link from the left side of the screen. Field explanationsare listed below the following screen example.Modulation Displays the current cable modem upstream modulationtype (QPSK/ QAM8 /QAM16/ QAM32/ QAM64/ QAM128/QAM256).Symbol Rate Displays the symbol rate (Ksym/sec).Upstream Mini-Slot Size Displays the current cable modem upstream mini-slot sizein Timebase Ticks of 6.25.Power Level Displays the current cable modem upstream transmitpower (dBmV).T-1 through T-4 Timeouts T-1-Displays DHCP time expiration, T-2-Displays DHCPtime expiration, T-3-Displays RNG-RSP time expiration, T-4-Displays RNG time expiration.Label Description
