Ubee DDW3612 User Manual
Also see for DDW3612: Setup guide
                                                                      | |
Contents
| 
1.1 Device Overview Ubee Interactive4 DDW3612 Subscriber User Guide • July, 2010 Operating Temperature: 0°C ~ 40°C Humidity: 5~90% (non-condensing)1.1.3 Default ValuesThis device is pre-configured with the following parameters:Local Port Address: 192.168.0.1, Web Interface: http://192.168.0.1Operation Mode: NAT Mode (WAN setting)Subnet Mask: 255.255.255.0Wireless Defaults: Primary SSID (subscriber-managed) = DDW3612 plus last 2 characters of thecable modem’s MAC Address (UPPER case, if letters).Example: DDW3612BENote: If the subscriber changes the SSID, the device does not revert to this defaultSSID upon any reset of the device, except in the case of a manual reset to restorefactory default settings. The device MAC address can be found on the devicelabel, or refer to Cable Modem - Information (p. 12). WPA Pre-shared Key = DDW3612 plus the last 6 characters (3 octets) of thecable modem’s MAC address.Example: DDW36127CD4BE WPS PIN = 12345670 Device Name = UbeeAPWeb Interface Logins (also used for telnet access):Standard User/Consumer Web Interface Login:Username: userPassword: user |
Related manuals for Ubee DDW3612
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine