Ubee DDW3612 User Manual

Also see for DDW3612: Setup guide

Contents

Ubee DDW3612 User Manual Manual pdf 26 page image

3.7 Gateway Ubee Interactive22 DDW3612 Subscriber User Guide • July, 20103.7.3 Gateway - DHCPThe DHCP option allows you to configure DHCP-specific behavior on the device.1. Access the web interface. Refer to page 7, if needed.2. Click the Gateway link from the top of the screen.3. Click DHCP from the left side of the screen. The DHCP fields are explainedfollowing this screen example.WAN Connection Type Select the WAN connection type. For each type, differentdata entry is required, as explained below:1. DHCP: The WAN interface is set to be a DHCP client,and the IP address is assigned by the service provider’sDHCP server.2. Static IP: For Static IP, you must manually enter the IPaddress for the WAN interface.3. PPTP (DHCP): For Point to Point Tunneling Protocol(PPTP), you must enter a username, password, and thePPTP server’s IP address.Host Name Enter the host name for the router. This may be required bysome service providers.Domain Name Enter the domain for the router. This may be required bysome service providers.MTU Size Enter the Maximum Transmission Unit size, which definesthe largest size of the packet or frame that the device cantransfer (256-1500). If this is not given by the ServiceProvider, leave it as is using 0 for the default.Apply Click to save all changes made in the screen.Label Description