Ubee Interactive 3.7 GatewayDDW3612 Subscriber User Guide • July, 2010 293.7.9 Gateway - IP FilteringThe IP Filtering option allows you to filter IP addresses in order to block internettraffic to specific network devices on the LAN. Any host listed on this list will not beaccessible to internet traffic.1. Access the web interface. Refer to page 7, if needed.2. Click the Gateway link from the top of the screen.3. Click IP Filtering from the left side of the screen. The IP Filtering fields areexplained following this screen example.Clear Select Clear to delete the filtering rule.View Additional Rules: Select from the pull-down to display the remaining 10 rules, ifthey exist. 20 rules total are supported.Apply Click Apply to save all screen changes.Label DescriptionStart Address Enter the start IP address.End Address Enter the end IP address.Enabled Select Enabled to activate the rule.Apply Click Apply to save all screen changes.
