Ubee DDW3612 User Manual

Also see for DDW3612: Setup guide

Contents

Ubee DDW3612 User Manual Manual pdf 49 page image

Ubee Interactive 3.8 WirelessDDW3612 Subscriber User Guide • July, 2010 453.8.4 Wireless - AdvancedThe Advanced option allows you to configure data rates and WiFi thresholds.Note: This feature is available when logged into the device using the MSO userlogin. Refer to page 4 for more information.1. Access the web interface. Refer to page 7, if needed.2. Click the Wireless link from the top of the screen.3. Click Advanced from the left side of the screen. The Advanced fields areexplained following this screen example.MAC Addresses Input the MAC addresses. You may consider cutting andpasting MAC addresses from the connected clients list at thebottom of the screen.Apply Click to save.Connected Clients List of current connected Wireless client listed by MACaddress. Fields definitions are:Age(s)—The duration since the wireless client’s polled valueswere sent to the wireless router. The values include allinformation shown on this screen. The lower the number, themore current its data.RSSI(dBm)—Received signal strength from the device to thewireless cable modem. This value is commonly used to assistin troubleshooting wireless performance issues. A signalstrength of -30dBm to -67dBm is considered optimal. Levels of-67dBm and lower (e.g. -70, -80, etc.) will have a downwardimpact on wireless data throughput. Refer to “Wireless NetworkDeployment and Troubleshooting” on page 52 for moreinformation.IP Address—The IP address assigned to this wireless client.Host Name—The host name of the wireless client.