Call recording 187Call recordingA central voice recorder is installed in the network for recording calls to whichyour telephone connects in order to record the current voice traffic. The recorderrecords the entire voice flow of two or more participants.You should configure a recording button in order to simplify handling of manualcall recording Page 69. It is assumed in the description below that a corre-sponding key has been configured.Recording modesThe administrator can configure the following operating modes for call record-ing:• Manual• AutoStart• All Calls• DisabledThe following settings are possible to audibly signal the recording:• Repeated• Single Shot• OffCheck with your administrator as to which settings were made for your phone.Mode: ALL CALLSThe telephone starts and stops the recorder automatically in order to ensure thatall calls are being recorded.Mode: MANUALYou decide when the recorder is started and stopped or paused. If the recorderis switched on, all further calls will be recorded. If you pause the recorder thennothing will be recorded. If there are no calls, then the recorder likewise pauses.Mode: AUTOSTARTThe telephone starts the recorder automatically. You can stop or pause the re-corder yourself however and restart it. If a call has already been recorded, newincoming and outgoing calls will also be recorded. If you pause the recorder dur-ing a call, special calls such as consultation calls, call pickups and second callswill not be recorded as long as the recorder is paused. If the telephone revertsto idle status, the AutoStart process is set up again for the next call.
