Basic functions 47Immediate diallingImmediate dialling should only be activated if administrator has configured andapproved a dial plan.Immediate dialling is deactivated by default. For this reason after entering thenumber you must either confirm the "Dial" option or wait until the dial delay ex-pires to set up the connection. If Immediate dialling is configured, your call isautomatically dialled as soon as the string entered matches an entry in the dialplan.Activating or deactivating immediate diallingz You can also configure this setting via the WBM interface Page 198.Settings Press the key shown.Select and confirm the option shown.Select and confirm the option shown.if nec.j Enter and confirm the User password.Select and confirm the option shown.Select and confirm the option shown.Select and confirm the option shown.Select and confirm the option shown.Confirm.Dialling using the hot or warm line functionYour administrator can configure a hot or warm line for your phone.If you lift the handset of the phone or press the loudspeaker key• with a hot line immediately or• with a warm line after a defined period of time,• a number specified by administrator is dialled.Examples:• The phone in the lift immediately dials the reception number.• The phone at a patient’s bed dials the ward number e.g. after a minute if noother number is dialled.SettingsUserConfigurationOutgoing callsImmediate dialling = No fYes lSave & Exit l
