Unitech MS852B Plus User Manual

Also see for MS852B Plus: Quick start guide Quick start guide

- 105 - © 2020 unitech Electronics Co., Ltd. All rights reserved.unitech is a registered trademark of unitech Electronics Co., Ltd.MS852B Plus User’s Manual3.2.15.1 MSI Check CharacterDifferent types of check characters are used with MSI bar codes. You canprogram the scanner to read MSI bar codes with Type 10 check characters.Default = Validate Type 10, but Don’t Transmit. When Check Character is setto Validate Type 10/11 and Transmit, the scanner will only read MSI bar codesprinted with the specified type check character(s), and will transmit thecharacter(s) at the end of the scanned data. When Check Character is set toValidate Type 10/11, but Don’t Transmit, the unit will only read MSI bar codesprinted with the specified type check character(s), but will not transmit thecheck character(s) with the scanned data.Validate Type 10, but Don’t Transmit*Validate Type 10 and TransmitValidate 2 Type 10 Characters, but Don’t TransmitValidate 2 Type 10 Characters and TransmitValidate Type 10 then Type 11 Character, but Don’t TransmitValidate Type 10 then Type 11 Character and TransmitDisable MSI Check Characters