Unitech MS852B Plus User Manual

Also see for MS852B Plus: Quick start guide Quick start guide

- 48 - © 2020 unitech Electronics Co., Ltd. All rights reserved.unitech is a registered trademark of unitech Electronics Co., Ltd.MS852B Plus User’s Manual2.32.2 Add a Data FormatStep 1.Scan the Enter Data Format symbol.Step 2.Select Primary/Alternate FormatDetermine if this will be your primarydata format, or one of 3 alternate formats. This allows you to save atotal of 4 different data formats. To program your primary format, scan 0using the Programming Chart inside the back cover of this manual. Ifyou are programming an alternate format, scan 1, 2, or 3, depending onwhich alternate format you are programming. (See "Primary/AlternateData Formats" for further information.)Step 3.Terminal TypeRefer to Terminal ID Table and locate the Terminal IDnumber for your PC. Scan three numeric bar codes on the inside backcover to program the scan engine for your terminal ID (you must enter3 digits). For example, scan 0 0 3 for an AT wedge.Note:099 indicates all terminal types.Step 4. Code I.D.In the Symbology Charts, beginning on page A-1, find thesymbology to which you want to apply the data format. Locate the Hexvalue for that symbology and scan the 2 digit hex value from theProgramming Chart.If you wish to create a data format for all symbologies, with theexception of some specific symbologies, refer to B8. If you are creatinga data format for Batch Mode Quantity, use 35 for the Code I.D.Note:99 indicates all symbologies.Step 5.LengthSpecify what length (up to 9999 characters) of data will beacceptable for this symbology. Scan the four digit data length from theProgramming Chart. For example, 50 characters is entered as 0050.Note:9999 indicates all lengths.Step 6.Editor CommandsRefer to Data Format Editor Commands. Scan thesymbols that represent the command you want to enter. 94alphanumeric characters may be entered for each symbology dataformat.Step 7.Scan Save to save your data format, or Discard to exit without savingyour changes.