99Barcode length- Use the L1 as minimum length option if you know the minimum length of thecodes in your application!!!- To optimize decoding performance and increase security, select the samelength as the minimum length in your application (do not select a shorterlength!!).Length = [start] + [barcode data] + [2-character Check digit] + [stop]- Minimum length possible = 5 characters.Maximum length possible = 25 characters.Length mode- L1 = Codes with as many characters as specified by L1 and longer are read(L2 and L3 are not used).- L2 = Only codes that comply with the lengths specified by L1, L2, and L3 willbe read.- L3 = Codes at least the length specified by L1 and no longer than themaximum length specified by L2 are read (L3 is not used).Plessey Code - Barcode length - Length mode - L1 as Minimal length (*)475300Plessey Code - Barcode length - Length mode - L1, L2, L3 as fixed length475301Plessey Code - Barcode length - Length mode - L1 as min, L2 as max475302
