111Barcode length- Use the L1 as minimum length option if you know the minimum length of thecodes in your application!!!- To optimize decoding performance and increase security, select the samelength as the minimum length in your application (do not select a shorterlength!!).Length = [barcode data]- Minimum length possible = 1 character.Length mode- L1 = Codes with as many characters as specified by L1 and longer are read(L2 and L3 are not used).- L2 = Only codes that comply with the lengths specified by L1, L2, and L3 willbe read.- L3 = Codes at least the length specified by L1 and no longer than themaximum length specified by L2 are read (L3 is not used).Telepen - Barcode length - Length mode - L1 as Minimal length (*)495300Telepen - Barcode length - Length mode - L1, L2, L3 as fixed length495301Telepen - Barcode length - Length mode - L1 as min, L2 as max495302
