23. Getting StartedTo scan a barcode, make sure the aiming beam crosses every bar and spaceof the barcode.BATTERY CHARGING1. Flip up the rubber cover to expose the mini USB port on the scanner.2. Insert the mini USB connector into the port on the scanner and the standardUSB connector of the USB cable into a USB port on the host PC.Pairing With PC/Notebook For The First TimePC (HID mode)Following steps are based on Microsoft Windows 7.1. Use MS920 to scan barcode “HID”.2. Open Devices and Printers by clicking the Start button , and then, onthe Start menu, clicking Devices and Printers.3. Click Add a device, and then follow the instructions.4. Click the Bluetooth enabled device (Unitech BT XXXXXX) you want to addto your computer, and then click Next. If you don't see the device you want toadd, make sure the device is turned on and discoverable. If you just turned onthe device, it may take Windows several seconds to detect it.For Bluetooth 2.0 (or lower) pairing, you have to use MS 920 to scan functionbarcodes and numerical “Bluetooth Pincode” according to the direction shownon the screen of the PC the MS 920 is pairing to during the pairing procedure.Numerical barcodes and other function barcodes for Bluetooth Pincode entry
