8Scanning / Triggering - Turn off after good read - Retrigger delay - 0 (*)70860000Aimer mode- Allows you to locate the bar code you want to read.- The aiming beam is only used with the following trigger modes:- Level- Pulse- Autostand- Toggle*-NOTE*: In Toggle trigger mode, "one pull aim, one pull read" does not work asstated. Instead one pull turns on the aimer only. When the trigger is releaseddecoding begins. If no decode, second pull turns aimer and decoding off.Scanning / Triggering - Aimer mode - Typical aimer (*)704500Scanning / Triggering - Aimer mode - One pull aim and read704501Scanning / Triggering - Aimer mode - One pull aim, second pull read704502
