5Scanning / Triggering - Trigger timeout (sec) - 2 (*)70800002Trigger activation- Used to enable or disable hardware or emulated triggers.- IMPORTANT: You cannot activate the trigger line if the hardware trigger isdisabled. If you are using level or pulse trigger modes, the only way tore-activate the hardware trigger is by using online set up (ISCP terminal) orsending an ISCP command.Hardware and emulated triggers are disabled. The only way to turn the imageron is by sending a decode on/decode off control command (20, 40).Scanning / Triggering - Trigger activation - Disabled704100Hardware trigger ONLY is enabled.Scanning / Triggering - Trigger activation - Hardware trigger enabled704101Emulated trigger ONLY is enabled.- The trigger can only be activated by sending the emulated trigger ISCPcontrol command 50, 47.Scanning / Triggering - Trigger activation - Emulated trigger enabled704102
