4At power up lighting and decoding are on.- After a period of inactivity lasting the time specified by the trigger timeout, thelighting turns off or is dimmed (depending on the scanner used).- When a new bar code is presented the lighting and decoding restart and stayon until another period inactivity.- The trigger can be used in Presentation mode - when you pull the trigger thescanner functions as if it were in Level mode.- Only available with 2D models.Scanning / Triggering - Triggering modes - Presentation704006Presentation threshold- Only available on 2D models.- Use this setting when in Presentation Triggering mode to regulate howsensitive the imager is to movement which automatically wakes up thescanner.- The higher the value = the stronger the movement is needed to wake up thescanner.Scanning / Triggering - Presentation threshold - 50 (*)704932Trigger timeout (sec)- The trigger timeout is used in the following trigger modes:- Pulse- Flashing- Autostand- Value in seconds
