- 34 -MS926 User’s Manual3.3.4.2 Code 93 AppendThis function allows the scanner to append the data from several Code 93 barcodes together before transmitting them to the host computer. When thisfunction is enabled, the scanner stores those Code 93 bar codes that start witha space (excluding the start and stop symbols), and does not immediatelytransmit the data. The scanner stores the data in the order in which the barcodes are read, deleting the first space from each. The scanner transmits theappended data when it reads a Code 93 bar code that starts with a characterother than a space. Default = Off.Off *On3.3.4.3 Code 93 Code PageCode pages define the mapping of character codes to characters. If the datareceived does not display with the proper characters, it may be because thebar code being scanned was created using a code page that is different fromthe one the host program is expecting. If this is the case, scan the bar codebelow, select the code page with which the bar codes were created (see ISO2022/ISO 646 Character Replacements), and scan the value and the Save barcode from the Programming Chart. The data characters should then appearproperly.Code 93 Code Page
