- 59 -MS926 User’s Manual3.3.21.3 Data Matrix Code PageData Matrix Code pages define the mapping of character codes to characters.If the data received does not display with the proper characters, it may bebecause the bar code being scanned was created using a code page that isdifferent from the one the host program is expecting. If this is the case, scanthe bar code below, select the code page with which the bar codes werecreated (see ISO 2022/ISO 646 Character Replacements ), and scan the valueand the Save bar code from the Programming Chart. The data charactersshould then appear properly.Data Matrix Code Page3.3.22 MaxiCodeMaxiCode OnDefault All MaxiCode SettingsMaxiCode Off*3.3.22.1 MaxiCode Message LengthScan the bar codes below to change the message length. Refer to MessageLength Description for additional information. Minimum and Maximum lengths= 1-150. Minimum Default = 1, Maximum Default = 150..Minimum Message LengthMaximum Message Length
