- 84 -MS926 User’s Manual4.6.5 Mobile Phone Read ModeWhen this mode is selected, your scanner is optimized to read bar codes frommobile phone or other LED displays. However, the speed of scanning printedbar codes may be slightly lower when this mode is enabled.Note: To turn off Mobile Phone Read Mode, scan a Manual or Serial Trigger Mode bar code.Hand Held Scanning - Mobile PhonePresentation Scanning - Mobile Phone4.6.6 Hands Free Time-OutThe Scan Stand and Presentation Modes are referred to as “hands free”modes. If the scanner’s trigger is pulled when using a hands free mode, thescanner changes to manual trigger mode. You can set the time the scannershould remain in manual trigger mode by setting the Hands Free Time-Out.Once the time-out value is reached, (if there have been no further trigger pulls)the scanner reverts to the original hands free mode. Scan the Hands FreeTime-Out bar code, then scan the time-out duration (from 0-300,000milliseconds) from the inside back cover, and Save. Default = 5,000 ms.Hands Free Time-Out
