Vacon 10 Complete User's Manual
Also see for 10: Quick guideComplete user's manualUser instructionQuick guideQuick guide
                                                                                        | |
Contents
| 
39 • vacon control panelTel. +358 (0)201 2121 • Fax +358 (0)201 21220577.4.5 Fault history menuFigure 7.16: Fault history menuIn Fault history menu you can browse through 9 latest faults (see Figure 7.16). If afault is active, the relevant fault number (e.g. F1 02) alternates in the display withmain menu. When you browse between the faults, the fault codes of active faults areblinking. The active faults can be reset by pressing the STOP button for 1 time. If thefault cannot be reset, the blinking continues. It is possible to navigate in the menustructure also when there are active faults present, but the display returns automat-ically to the fault menu if buttons or navigation wheel are not pressed or navigationis not rotated. The operating date, hour and minute values at the fault instant areshown in the value menu (operating hours = displayed reading).Note! The whole fault history can becleared by pressing STOP button for 5 sectime when the drive is stopped and Faulthistory menu is selected in the display.See Chapter 5 for fault descriptionsFAULTALARMSTOPREADY RUNREFMONPARFLTFWD REV I/O KEYPAD BUSFAULTALARMSTOPREADY RUNREFMONPARFLTFWD REV I/O KEYPAD BUSFAULTALARMSTOPREADY RUNREFMONPARFLTFWD REV I/O KEYPAD BUSFAULTALARMSTOPREADY RUNREFMONPARFLTFWD REV I/O KEYPAD BUSBrowsefaults 1-9PushPushBrowsefor days (D),hours (H)and minutes (M) |
Related manuals for Vacon 10
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine